MIL-A-10936 - Aluminum Base Alloy, Sand Castings (No S/S Documents)
MIL-A-15939 - Aluminum Bronze Bars, Plates, Rods, Sheets, Strips, Forgings, And Structural And Special Shaped Sections (Use Qq-A-620 And Qq-A-630)
MIL-A-18593 - Aluminum Alloy Bars, Rods, And Structural And Special Shaped Sections-Extruded, 6063 (63S) (S/S By Qq-A-274)
MIL-A-19005 - Aluminum Alloy Bar, Rod And Structural And Special Shaped Section-Extruded, 5083(K--183) (Use Qq-A-200/4)
MIL-A-21170 - Aluminum Alloy Bar, Rod, And Structuralshaped Sections-Rolled Or Extruded, 5456
MIL-A-21579 - Aluminum Alloy Bars, Rods, And Structural Shapes-Rolled Or Extruded, 5086
MIL-A-21599 - Aluminum Alloy Bars, Rods, And Structural Shapes-Rolled Or Extruded, 5454
MIL-A-22152 - Aluminum Alloy Sand Castings Heat Treatment Processes Of (Use Mil-H-6088)
MIL-A-25493 - Aluminum Alloy Bars, Rods, And Shapes, Extruded, 6066
MIL-A-46104 - Aluminum Alloy Bar, Rod, Shapes, And Tube, Extruded, 6070 (S/S By Astm-B221 And Astm-B221M)
This specification covers the specific requirements for aluminum alloy 6070 bar, rod, shapes, and tube produced by extrusion.
MIL-A-63547 - Aluminum Alloy 7475, Rod
This specification covers requirements, quality assurance provisions and packaging of Aluminum Alloy 7475, Rod for use in the manufacture of cartridge cases.
MIL-A-8825 - Aluminum Alloy Bars And Shapes, Extruded, 7079 (S/S By Qq-A-200/12)
MIL-A-9186 - Aluminum Alloy Bars, Rods And Shapes, Extruded, 7178 (S/S By Qq-A-200/13)
MIL-B-16033 - Bronze, Aluminum, Castings (Use Qq-C-390)
MIL-B-16166 - Bronze, Aluminum, Forgings, Heat Treated
This specification covers the requirements for heat-treated aluminum bronze die forgings and smith or hand forgings.
MIL-B-16444 - Bronze, Hydraulic (Ounce Metal). Casting (Use Qq-C-390)
MIL-B-19231 - Bars, Copper, Silver-Bearing (For Commutators)
This specification describes the requirements for the procurement of silver-bearing copper bars for fabrication into commutator bars. (See 6.1).
MIL-B-24059 - Bronze, Nickel Aluminum; Rod, Flat Products With Finished Edges, Shapes And Forgings (S/S By Qq-C 00465B
MIL-C-19311 - Copper Chromium Alloy Forgings, Wrought Rod, Bar, And Strip (Copper Alloy Numbers 182, 184, And 185)
This specification covers copper-chromium -alloy forgings and also wrought material in rod, bar, and strip form which have been solution heat treated, quenched, cold worked, as applicable, and precipitation heat treated. (See 6.1.)
MIL-C-21657 - Copper-Beryllium Alloy, Low Magnetic Effect (For Special Purpose Tools And Equipment)
MIL-C-22032 - Cobalt-Chromium-Tungsten-Nickel Alloy, Bar Plate And Sheet, Low Magnetic Effect (For Special Purpose Tools And Equipment)
MIL-C-22226 - Copper-Nickel-Manganese Alloy Bars, Plates, And Sheets, Low Magnetic Effect (For Special Purpose Tools And Equipment)
This specification covers a 60-percent copper, 20-percent nickel, 20-percent manganese alloy (see table I) having low magnetic permeability and capable of developing high strengths by heat treatment.
MIL-C-24111 - Chromium-Nickel Alloy Steel Bars, Rods And Forgings, Corrosion Resistant
MIL-C-46029 - Coper-Titanium Alloy Plate, Bar, Sheet And Strip
MIL-C-50709 - Copper-Base Sintered Bars (Oil Impregnated) (S/S By Astm-B438)
This specification covers copper-base sintered metal powder, oil impregnated bars.
MIL-C-50 - Copper Alloy Number 260 (Cartridge Brass, 70 Percent); Sheet, Strip, Plate, Bar, And Discs (S/S By Astm-B19)
MIL-C-895 - Commercial Brass Bars, Plates, Rods, Shapes, Sheets, Strips, Flat Wire And Forgings (Navy) (Use Qq-B-613 Or Qq-B-626 As Applicable)
MIL-C-947 - Copper-Beryllium-Alloy: Bars, Rods, Plates, Strips, And Wire (S/S By Qq-C-530 And Qq-C-533)
MIL-D-18047 - Aluminum Alloy Bars, Rods,And Structural And Special Shaped Sections-Extruded, 6063 (63S) (S/S By Qq-A-274)
MIL-DTL-24252 - Cobalt-Chromium-Tungsten-Nickel Alloy (Uns R30605) And Cobalt-Chromium-Tungsten Alloy (Uns R30016) Bars And Forgings
This specification covers cobalt-chromium-tungsten-nickel alloy (UNS R30605) and cobalt-chromium-tungsten alloy (UNS R30016) wrought bars and forgings.
MIL-DTL-24492 - Nickel-Chromium-Iron-Columbium Age-Hardenable Alloy Bars, Reforging Stock, And Forgings (Alloy 718 (Uns N07718))
This specification covers nickel-chromium-iron-columbium age-hardenable alloy (Alloy 718 (UNS N07718)) bars, reforging stock, and forgings for use in applications specifically approved by NAVSEA.
MIL-DTL-24527 - Chromium Nickel Alloy Steel Bars, And Forgings, Corrosion Resistant (Precipitation Hardening) (Uns S17400)
This specification covers consumable electrode vacuum arc remelted chromium-nickel alloy [UNS S17400] (17-4PH), precipitation hardening, corrosion resistant steel bars and forgings.
MIL-F-83142 - Forging, Titanium Alloys, Premium Quality (See Notice 5 For Replacement Information)
This specification covers unalloyed titanium and titanium alloy forgings suitable for aircraft and aerospace components.
MIL-H-23191 - Hafnium Wrought Products (For Official Use Only)
MIL-M-14582 - Molybdenum Rod, Wire, Sheet, And Strip
MIL-M-26696 - Magnesium Alloy Bar, Rod, And Special Shaped Sections Extruded, (P)Zk60B
This specification covers the requirements for magnesium alloy bars, rods, and shapes extruded from (P) ZK60B alloy pellets, and furnished in the T-5 condition, artificially aged. (see 6.3.)
MIL-M-46039 - Magnesium Alloy Bar, Rod, And Special Shaped Sections, Extruded (Zk21A) (S/S By Sae-Ams4387)
This specification covers magnesium alloy bar, rod, and special shaped sections in the "as extruded" temper (ZK21A).
MIL-M-8916 - Magnesium Alloy Bar, Rod, And Special Shaped Sections, Extruded (Hm31A-T5) (S/S By Sae-Ams4389)
This specification covers HM31A magnesium alloy bar, rod, and special shaped sections in the artificially aged (t5) temper.
MIL-N-15721 - Nickel-Chromium Alloy Bars And Rods (Boiler Refractory Anchor Bolts) (S/S By Mil-B-15382)
MIL-N-24106 - Nickel-Copper Alloy Bars, Rods, And Forgings
This specification covers nickel-copper alloy bars, rods and forgings.
MIL-N-24549 - Nickel-Copper-Aluminum Alloy, Age Hardenable, Bars And Rods
This specification covers nickel-copper-aluminum alloy age hardenable bars and rods in six conditions as specified herein. Requirements are included for special testing of material which is to be supplied in the hot finished, cold drawn, hot finished and annealed or cold drawn and annealed conditions to demonstrate the capability of producing required mechanical properties, after annealing and age hardening or age hardening, as applicable.
MIL-N-8550 - Nickel Alloy, Bars, And Forgings, 1,200 Deg. F To 1,500 Deg. F Operating Temperatures
This specification covers a nickel-chromium-iron alloy similar to an alloy commercially designated as "Inconel X", in the form of bars, forging stock, or forgings.
MIL-STD-412 - Alloy Designation System For Titanium
This standard establishes a uniform system for designating the major alloying elements, the respective percentages of these elements, and the temper for titanium alloy.
MIL-T-14557 - Titanium And Titanium Alloy, Wrought, Bars, Forgings And Forging Stock (Use Mil-T-9047)
MIL-T-46038 - Titanium Alloy, Wrought, Rods, Bars, And Billets (For Critical Applications)
MIL-T-9047 - Titanium And Titanium Alloy Bars (Rolled Or Forged) And Reforging Stock, Aircraft Quality (S/S By Sae-Ams-T-9047)
This specification covers aircraft quality, commercially pure titanium and alpha, alpha-beta and beta titanium alloy rolled or forged bar and reforging stock products.
MIL-U-46045 - Uranium Alloy, Wrought, Bars, Billets, And Tubular Shapes
MIL-Z-883 - Zinc: Plates, Rods, Sheets And Strips (S/S By Qq-Z-301 And Mil-A-18001)
MS14245 - (
Images) Bar, Octagonal, Aluminum Alloy 2024
MS14246 - ( Images) Bar, Hexagonal, Aluminum Alloy 2014
MS14247 - ( Images) Bar, Hexagonal, Aluminum Alloy 2024
MS14248 - ( Images) Bar, Hexagonal, Aluminum Alloy 6061
MS14249 - ( Images) Bar, Hexagonal, Aluminum Alloy 7075
MS14250 - ( Images) Bar, Hexagonal, Aluminum Alloy 2017
MS14251 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy 2024
MS14252 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy 6061
MS14253 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy, 6063
MS14254 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy 7075
MS14255 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy 2014
MS14256 - ( Images) Bar, Rectangular, Square Corners, Aluminum Alloy 5052
MS14257 - ( Images) Rod, Aluminum Alloy 2014
MS14258 - ( Images) Rod, Aluminum Alloy 2024
MS14259 - ( Images) Rod, Aluminum Alloy 6061
MS14260 - ( Images) Rod, Aluminum Alloy 7075
MS14261 - ( Images) Rod, Aluminum Alloy 1100
MS14262 - ( Images) Rod, Aluminum Alloy, 3003
MS14263 - ( Images) Rod, Aluminum Alloy, 2017
MS14264 - ( Images) Rod, Aluminum Alloy, 5052
MS14265 - ( Images) Bar, Square, Aluminum Alloy 2014
MS14266 - ( Images) Bar, Square, Aluminum Alloy 2024
MS14267 - ( Images) Bar, Square, Aluminum Alloy 6061
MS14268 - ( Images) Bar, Square, Aluminum Alloy 7075
MS14350 - ( Images) Bar, Flat Aluminum Alloy, 5086
MS14351 - ( Images) Bar, Square, Aluminum Alloy, 5086
MS14352 - ( Images) Rod, Aluminum Alloy, 5086
MS500148 - ( Images) Bar, Metal, Round, Copper Base Alloy 464
MS500149 - ( Images) Bar, Metal, Hexagon, Copper Base Alloy 464
MS500150 - ( Images) Bar, Metal, Square, Copper Base Alloy 464
MS500151 - ( Images) Bar, Metal, Flat, Copper Base Alloy 464
MS500152 - ( Images) Bar, Metal, Round, Copper Base Alloy 482
MS500153 - ( Images) Bar, Metal, Hexagon, Copper Base Alloy 482
MS500163 - ( Images) Bar, Metal, Flat Copper Beryllium, Alloy 172
MS52009 - ( Images) Bar, Metal, Flat, Copper Base Alloy 260
MS52010 - ( Images) Bar, Metal, Flat, Copper Base Alloy 268
MS52011 - ( Images) Bar, Metal, Flat, Copper Base Alloy 342
MS52012 - ( Images) Bar, Metal, Flat Copper Base Alloy 360
MS52013 - ( Images) Bar, Metal, Hexagon, Copper Base Alloy 268
MS52014 - ( Images) Bar, Metal, Hexagon, Copper Base Alloy 342
MS52015 - ( Images) Bar, Metal, Hexagon, Copper Base Alloy 360
MS52016 - ( Images) Bar, Metal, Round Copper Base Alloy 268
MS52017 - ( Images) Bar, Metal, Round, Copper Base Alloy 360
MS52018 - ( Images) Bar, Metal, Oval, Copper Base Alloy 268
MS52019 - ( Images) Bar, Metal, Square, Copper Base Alloy 260
MS52020 - ( Images) Bar, Metal, Square Copper Base Alloy 268
MS52021 - ( Images) Bar, Metal, Square Copper Base Alloy 360
QQ-A-200/10 - Aluminum Alloy 6066, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Sae-Ams-Qq-A-200/10, Astm-B241/B241M, And Astm-B221)
This specification covers the specific requirements for aluminum alloy 6066, bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/11 - Aluminum Alloy 7075, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Sae-Ams-Qq-A-200/11, Astm-B241/B241M And Astm-B221)
QQ-A-200/12 - Aluminum Alloy Bar, Rod, Shapes, Tube, And Wire, Extruded, 7079
QQ-A-200/13 - Aluminum Alloy 7178, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Sae-Ams-Qq-A-200/13, Astm-B241/B241M And Astm-B221)
This specification covers the specific requirements for aluminum alloy 7178 bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/16 - Aluminum Alloy Structural Shapes, Extruded, 6061 (Refer To Sae-Ams-Qq-A-200/16 And Astm-B308/B308M)
This specification covers the specific requirements for aluminum alloy 6061 structural shapes produced by extrusion. The general requirements are covered in QQ-A-200.
QQ-A-200/17 - Aluminum Alloy 6162, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Sae-Ams-Qq-A-200/17, Astm-B241/B241M And Astm-B221)
This specification covers the specific requirements for aluminum alloy 6162 bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/1 - Aluminum Alloy 3003, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/1)
This specification covers the specific requirements for aluminum alloy 3003 bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/2 - Aluminum Alloy 2014, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/2)
QQ-A-200/3 - Aluminum Alloy 2024, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B221, Astm-B241/B241M And Sae-Ams-Qq-A-200/3)
QQ-A-200/4 - Aluminum Alloy 5083, Bar, Rod, Shapes, Structural Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/4)
This specification covers the specific requirements for aluminum alloy 5083 bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/5 - Aluminum Alloy 5086, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/5)
This specification covers the specific requirements for aluminum alloy 5086, bar, rod, shapes, tube and wire products by extrusion.
QQ-A-200/6 - Aluminum Alloy 5454, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B221, Astm-B241/B241M And Sae-Ams-Qq-A-200/6)
This specification covers the specific requirements for aluminum alloy 5454 bar, rod, shapes, tube and wire produced by extrusion. The general requirements are covered in QQ-A-200.
QQ-A-200/7 - Aluminum Alloy 5456, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/7)
This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube and wire produced by extrusion. The general requirements are covered in QQ-A-200.
QQ-A-200/8 - Aluminum Alloy 6061, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/8)
This specification covers the specific requirements for aluminum alloy 6061, bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200/9 - Aluminum Alloy 6063, Bar, Rod, Shapes, Tube And Wire, Extruded (Refer To Astm-B241/B241M, Astm-B221 And Sae-Ams-Qq-A-200/9)
This specification covers the specific requirements for aluminum alloy 6063 bar, rod, shapes, tube and wire produced by extrusion.
QQ-A-200 - Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube And Wire, Extruded; General Specification For (Refer To Astm-B241/B241M, Astm-B221, Astm-B308/B308M And Sae-Ams-Qq-A-200)
This specification covers the general requirements for aluminum alloy bar, rod, shapes, structural shapes, tube and wire, extruded.
QQ-A-225/3 - Aluminum Alloy Bar, Rod, And Wire; Rolled, Drawn, Or Cold Finished, 2011(S/S By Sae-Ams-Qq-A-225 And Astm-B211)
QQ-A-261 - Aluminum Alloy Bar, Rod And Shapes, Extruded 2014 (S/S By Qq-A-200/2)
QQ-A-266 - Aluminum Alloy Bars, Rods, Wire, And Special Shapes, Rolled, Drawn, Or Cold Finished, 2014
QQ-A-267 - Aluminum Alloy Bar, Rod And Shapes, Extruded 2024 (S/S By Qq-A-200/3)
QQ-A-270 - Aluminum Alloy, Bar, Rod And Shapes, Extruded 6061, 6062 (S/S By Qq-A-200/8)
QQ-A-274 - Aluminum Alloy Bar, Rod, Shape, Extruded 6063 (S/S By Qq-A-200/9)
QQ-A-277 - Aluminum Alloy Bar, Rod And Shapes, Extruded 7075 (S/S By Qq-A-200/11)
QQ-A-354 - Aluminum-Alloy (Al-24) (Aluminum-Copper-Magnesium (1.50%)-Manganese); Bars, Rods, Shapes, And Wire (S/S By Qq-A-225/6)
QQ-A-357 - Aluminum Alloy Bar, Rod And Shapes, Extruded 3003 (S/S By Qq-A-200/1)
QQ-A-430 - Aluminum Alloy Rod And Wire; For Rivets And Cold Heading
Aluminum alloy wire and rod covered by this specification are suitable for the manufacturer of rivets and other utility items by cold die-heading operations.
QQ-B-611 - Brass, Commercial: Bars, Plates, Rods Shapes, Sheets And Strips (S/S By Qq-B-613 & Qq-B-626)
QQ-B-613 - Brass, Leaded And Nonleaded: Flat Products (Plate, Bar, Sheet, And Strip) (S/S By Astm-B36 And Astm-B121)
QQ-B-626 - Brass, Leaded And Nonleaded: Rod, Shapes, Forgings, And Flat Products With Finished Edges (Bar And Strip) (S/S By Astm-B121, Astm-B36, Astm-B16, Astm-B16M, And Astm-B124)
This specification covers alloys (composition) of brass rod, shapes, forgings, and flat products with finished edges (bar and strip) used for general fabricating purposes (see 6.1) but does not include strip or bar furnished with slit, sheared, sawed, or machined edges (see 6.6).
QQ-B-639 - Brass, Naval: Flat Products (Plate, Bar, Sheet, And Strip)
This specification covers four alloys of leaded and nonleaded naval brass flat products (bar, plate, sheet, and strip) with slit, slit and edge-rolled, sheared, sawed, or machined edges, but does not include flat products with finished edges.
QQ-B-663 - Bronze, Aluminum, Rod, Bar, Shape And Forging (S/S By Qq-A-630)
QQ-B-666 - Bronze, Aluminum, Bars, Plates, Rods, Shapes, Sheets, And Strips (S/S By Qq-B-663 And Qq-B-667)
QQ-C-450 - Copper-Aluminum Alloy (Aluminum Bronze) Plate, Sheet, Strip, And Bar (Copper Alloy Numbers 606, 610, 613, 614, And 630)
This specification covers five compositions of copper-aluminum alloy (aluminum bronze) flat products with slit, slit and edge rolled, sheared, sawed, or machined edges (plate, sheet, strip, and bar), but does not include flat products with finished edges.
QQ-C-576 - Copper Flat Products With Slit, Slit And Edge-Rolled, Sheared, Sawed Or Machined Edges, (Plate, Bar, Sheet, And Strip) (S/S By Astm-B152)
This specification covers copper flat products (bar, plate, sheet, and strip) with slit, slit and edge-rolled, sheared, sawed, or machined edges (see6.6).
QQ-C-585 - Copper-Nickel-Zinc Alloy Plate, Sheet, Strip, And Bar (Copper Alloy Numbers 735, 745, 752, 762, 766, And 770 (S/S By Astm-B122)
QQ-W-321/3 - Bar, Metal, Flat, Copper Alloy 240 (S/S By Astm-134, B159, B159M, B206, B206M)
QQ-W-321/6 - Bar, Metal, Flat, Copper Alloy 260 (S/S By Astm-B134, B159, B159M, B206, B206M)
QQ-W-321/9 - Bar, Metal, Flat, Copper Alloy 270 (S/S By Astm-B134, B159, B159M, B206, B206M)
acle (S/S By A-A-310)
This specification covers waxed paper bags suitable for use as an insert in sanitary waste receptacles for the disposal of garbage, refuse, and infectious waste.
UU-B-50 - Bag, Paper, Waxed (Sandwich)
UU-S-48 - Sacks, Shipping, Paper
This specification covers new multiwall paper shipping sacks.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business